In 2025, Make Up For Ever’s Morning Punch activation for the Super Boost launch put a boxing-ring photo zone and a gondola built from lockers into 8 Sephora stores across Canada. Designed by Park Creative Studio. Fabricated by shōmi! Custom.
Bold is the easy part of a brief. The hard part is what happens when a customer walks into it, leans on it, or throws a punch at it. Here’s how the retail display fabrication answered that.
The Brief
Make Up For Ever wanted a bold, immersive experience in 8 Sephora locations. It had to carry the brand’s dynamic, edgy energy. It had to get customers physically involved. It had to fit a tight budget and timeline. And it had to keep foot traffic areas safe and meet retail safety standards.
That last one drove several of the decisions below.
One more constraint, and this one is ours: we design for end-of-life. Every element was modular and built to come apart.
The Engineering Challenges
Three problems.
The gondola was originally spec’d as custom cabinetry, built 8 times over, on a timeline under 8 weeks.
The client envisioned merchandisers that protruded. Great for reach. A problem in a busy aisle.
And the boxing ring and bags had to be touched, and had to be safe when they were.
The Build
The gondola. Custom cabinetry was the original spec. The budget couldn’t carry it, so we used lockers instead.
Large industrial lockers, refinished in-house and custom-coloured to the brand palette. Each locker got a self-adhesive acrylic mirror. Around them, we built the rest of the gondola: a styrene-clad table with a mirror, a header wrapped in pressure-sensitive vinyl (PSV) with die-cut copy, and a base skirt made to accept printed media. The gondola mirror is 1/8-inch acrylic with routered holes for 1.85-inch vanity LEDs.

The sliding merchandisers. A merchandiser that sticks out into a store aisle is a merchandiser people walk into. So we built custom sliding mechanisms. The merchandisers extend when someone wants to interact. They retract into the display when no one does. The in-locker platforms are painted MDF on steel drawer slides.
The bags. A punching bag and a speed bag, patterned and sewn in-house in brand-approved vinyl. Doing it ourselves kept quality control in our hands and let us minimize waste.
The ring. The posts are steel frames on steel base plates, foam-wrapped and finished in stretch fabric.
The ropes are a foam and rope hybrid, wrapped in-house and attached with industrial-strength magnets. Strong enough for the structure. Quick-release for customer safety.
A rope designed to let go. That’s the safety feature.
The photo moment. An L-shaped wall, clad in printed styrene, with a bracket acting as a gusset at the corner. An acrylic mirror (1/8 inch). A 7-inch speed bag. The floor panel is printed styrene too, adhered to the floor with VHB.
The install. Everything was modular, so installs were fast and store operations kept running. All fabrication happened in-house.
What Shipped
- Reach: 8 Sephora locations across Canada.
- Timeline: under 8 weeks from concept to installation across all sites.
- Safety: sliding merchandisers that retract, quick-release magnetic ropes, and foam-wrapped ring components.
- Build: all fabrication in-house, a modular design for rapid installs, and components built to come apart.
The Real Lesson
The brief wanted bold. The floor wanted safe. Both were possible, but only because someone looked at the spec early.
Cabinetry became lockers. Protruding became sliding. A rope became a magnet.
That’s the fun part of this work. The first idea is rarely the one we end up building.
Working on an activation where the brief and reality disagree? Bring it to us early. That’s usually where the better answer is.

